PsWriteLinearMemory

Writes memory contents using a linear address.

Syntax

PULSE_STATUS PsWriteLinearMemory(
[in] PPS_ENGINE pEngine,
[in] uint64_t PageTableAddress,
[in] uint64_t Address,
[in] void* pBuffer,
[in] uint64_t cbToWrite,
[out, optional] uint64_t* pcbWritten
);

Parameters

PPS_ENGINE pEngine

An opaque handle to an engine created by the EngCreateEngine function.

uint64_t PageTableAddress

The target page table root address. This page table is used to perform the page walk for the given address. The currently loaded page table address is in the CR3 register.

uint64_t Address

The linear address to which data is written.

void* pBuffer

The buffer containing the data to be wrttien.

uint64_t cbToWrite

Specifies how many bytes should be written.

uint64_t* pcbWritten

Returns the number of bytes that were actually written.

Return value

If the function succeeds, the return value is PULSE_STATUS_SUCCESS.

If it fails, it returns one of the PULSE_STATUS values. Possible return codes include, but are not limited to, the following:

PULSE_STATUS_PARTIAL_WRITE 0x00000002	Only a portion of memory was written. Check the *pcbWritten parameter value to determine how many bytes were written.
PULSE_STATUS_INSUFFICIENT_RESOURCES 0xC0000002	One of the memory allocations failed during initialization.
PULSE_STATUS_READ_FAILED 0xC0000003	Transport communication failed during a read operation.
PULSE_STATUS_WRITE_FAILED 0xC0000004	Transport communication failed during a write operation.
PULSE_STATUS_TIMEOUT 0xC0000007	Might happen if Transport I/O timed out. No response was received from the debuggee within the request timeout period.
PULSE_STATUS_INVALID_PARAMETER 0xC0000010	Might happen if The pEngine parameter is NULL. The pBuffer parameter is NULL.
PULSE_STATUS_INVALID_PACKET 0xC0000031	An invalid or unexpected packet was received in response.
PULSE_STATUS_INVALID_TRANSLATION 0xC0000021	Linear to physical address translation failed. Might happen if there is no valid page in the translation.
PULSE_STATUS_DEVICE_CONNECTION_LOST 0xC0000308	The connection to the transport was lost. Try restarting the engine or the transport.

Remarks

The maximum number of bytes that can be written in a single request can be determined using the PsRequestGetMaxWriteLinearMemoryBufferSize function. If a larger amount is specified, this function performs multiple requests to the debug target.

Partial writes may occur when address translation is not available beyond a certain point.